Barrel transfer pumps are ideally used for Transferring/spraying of Lubricating, Rust Proof, Undercoating Fluids (Oil, Grease, Wax, Glue etc)
- Pneumatically sensed Air Motor
- Double acting pulsation free output (suitable for spraying)
- Stainless Steel rust proof Hydraulic Body
- Easy Maintenance
- Ice Free Air Motors
- Light and Easy to handle.
- Manual / Automatic Guns
- Guns with flow indicators
- Guns with batch controller
- Hose Reel
- Lifters
- Barrel covers
Accessories
| Type | Hippo 5.230 | Hippo 12.230 | Hippo 20.230 |
| Pressure Ratio | 5:1 | 12:1 | 20:1 |
| Out put per cycle | 230 cc | 230 cc | 230 cc |
| Air motor piston Φ | 80 mm | 125 mm | 160 mm |
| Stroke Length | 120 mm | 120 mm | 120 mm |
| Recommended Maximum transfer Volume per minute | 11.5 ltr | 9.2 ltr | 6.9 ltr |
| Air Inlet pressure Max | 6 bar | 6 bar | 6 bar |
| Outlet Pressure Max | 30 bar | 72 bar | 120 bar |
| Air Consumtion N liter/min | 370 | 560 | 890 |
| Typical fluids handled | motor oil,synthetic oil,Hydraulic oil,Auto transmission fluid | motor oil,synthetic oil,Gear oil,Pourable light lubricating grease | Under coating / rust proofing fluids,pourable lubricating grease,Pourable glues,Paste |
Barrel transfer pumps are ideally suited for isocyanate / moisture-sensitive materials
 
- Special cylinder in cylinder divorced design never allows material up to throat seals so never leakage from throat seals. (Wet cup & throat seals are only to provide a barrier between atmosphere & material in drum & pump not to prevent any kind of chemical leakage.) so that no jamming due to cured material on shaft coming out of / going in throat seals
- All stainless steel wetted parts & PTFE seals
- Equal dispense volume on both up & downstroke.
- Triclover clamp for quick connecting / disconnecting & tight sealing on drums.
 
| PART NO | 29 009 000 00 |
| Output (Continuous Duty) | 21 Ltrs/min |
| Output (Intermittent Duty) | 42 Ltrs/min |
| Cycles per litre | 5 |
| Cycles per gal | 19 |
| Pressure Ratio | 4.5 : 1 |
| Stroke Length | 120 mm |
| Air Motor Piston Φ | 80 mm |
| Air inlet pressure max. | 6 bar |
Product Categories
Feel Free to contact us
Have questions about our services or a project that needs quoting? Answers are always just an email or phone call away